Author Index

A

  • Abbasi, M. Dye removal from water by zinc ferrite-graphene oxide nanocomposite [Volume 11, Issue 2, 2018, Pages 85-92]
  • Ahmadi, H. Evaluating the Role of antioxidants in the stabilization of hydroxypropyl cellulose by ATR-FTIR Spectroscopy [Volume 11, Issue 2, 2018, Pages 93-101]
  • Ahmadi Moghaddam, H. Dispersion and Nonlinearity in Ultra-Optical Ga2O3 and TiO2-Bi2O3-PbO Glass Systems [Volume 11, Issue 3, 2018, Pages 179-191]
  • Aliakbari, M. Assessing the Effect of Nylon 66 and Alumina on Mechanical and Thermal Properties of Epoxy-based Adhesives Through Taguchi Experimental Design Analysis [Volume 11, Issue 3, 2018, Pages 149-164]
  • Arjmandi, S.A. Dye removal from water by zinc ferrite-graphene oxide nanocomposite [Volume 11, Issue 2, 2018, Pages 85-92]
  • Ashrafi, N. Dyeing Properties and Color Fabrics Using Natural Dye and Mordant [Volume 11, Issue 2, 2018, Pages 79-83]
  • Ataeefard, M. Investigation the effect of substrate photo-electrode based on screen method on performance of dye-sensitized solar cells [Volume 11, Issue 1, 2018, Pages 47-54]

B

  • Balashabadi, P. Effect of Gas Ratio on Tribological and Corrosion Properties of Ion Beam Sputter Deposited TiN Coatings [Volume 11, Issue 3, 2018, Pages 129-135]
  • Benayoun, S. Scratch Resistance of Paints Degraded by Arid Saharan Environments [Volume 11, Issue 4, 2018, Pages 233-240]
  • Bhowal, A. Comparison of dyeing of polyester fibers with natural dye and bio-mordant [Volume 11, Issue 3, 2018, Pages 165-172]

D

  • Dadashian, F. Acid Dyes Removal from textile wastewater using waste cotton activated carbon: Kinetic, isotherm, and thermodynamic studies [Volume 11, Issue 1, 2018, Pages 9-20]
  • Datta, S. Comparison of dyeing of polyester fibers with natural dye and bio-mordant [Volume 11, Issue 3, 2018, Pages 165-172]
  • Dehghan Banadaki, R. Synthesis of Fe-Doped Titanite and Quasi-Titanite Structures and Studying the Effect of Doping on Physical and Optical Properties [Volume 11, Issue 4, 2018, Pages 221-231]
  • Didehban, Kh. The Effect of Polyethylene Glycol and Nanoclay on the Rheological Behavior of Dispersing Cationic Polyurethane Nanocomposites [Volume 11, Issue 1, 2018, Pages 33-46]
  • Didehban, Kh. High-performance starch-modified graphene oxide/epoxy nanocomposite coatings: A glimpse at cure kinetics and fracture behavior [Volume 11, Issue 1, 2018, Pages 55-62]
  • Dodangeh, M. The Synthesis of Poly(amidoamine) Dendrimer: Dyeing and Fluorescence Properties [Volume 11, Issue 3, 2018, Pages 173-178]

E

  • Ekrami, E. Acid Dyes Removal from textile wastewater using waste cotton activated carbon: Kinetic, isotherm, and thermodynamic studies [Volume 11, Issue 1, 2018, Pages 9-20]

G

  • Ghanadzadeh Gilani, A. Study of Environment and pH Effects on the Spectral Behavior of Arylazobenzylidene Dyes [Volume 11, Issue 2, 2018, Pages 69-78]
  • Gharanjig, K. Investigation the effect of substrate photo-electrode based on screen method on performance of dye-sensitized solar cells [Volume 11, Issue 1, 2018, Pages 47-54]
  • Gharanjig, K. Dyeing Properties and Color Fabrics Using Natural Dye and Mordant [Volume 11, Issue 2, 2018, Pages 79-83]
  • Gharanjig, K. The Synthesis of Poly(amidoamine) Dendrimer: Dyeing and Fluorescence Properties [Volume 11, Issue 3, 2018, Pages 173-178]
  • Ghobadi Jola, B. The Effect of Polyethylene Glycol and Nanoclay on the Rheological Behavior of Dispersing Cationic Polyurethane Nanocomposites [Volume 11, Issue 1, 2018, Pages 33-46]
  • Golestani, Gh. A New Polymeric Nanocomposite Coating for Corrosion Protection of Carbon Steel in HCl Solution [Volume 11, Issue 1, 2018, Pages 1-8]
  • Grayeli Korpi, A.R. Effect of Gas Ratio on Tribological and Corrosion Properties of Ion Beam Sputter Deposited TiN Coatings [Volume 11, Issue 3, 2018, Pages 129-135]

H

  • Habibi, M. Effect of Gas Ratio on Tribological and Corrosion Properties of Ion Beam Sputter Deposited TiN Coatings [Volume 11, Issue 3, 2018, Pages 129-135]
  • Hamidi, A. Effect of Gas Ratio on Tribological and Corrosion Properties of Ion Beam Sputter Deposited TiN Coatings [Volume 11, Issue 3, 2018, Pages 129-135]
  • Hosseini-Zori, M. Synthesis, Characterization and Investigation of Photocatalytic Activity of transition metal-doped TiO2 Nanostructures [Volume 11, Issue 4, 2018, Pages 209-220]
  • Hosseinnezhad, M. Investigation the effect of substrate photo-electrode based on screen method on performance of dye-sensitized solar cells [Volume 11, Issue 1, 2018, Pages 47-54]
  • Hosseinnezhad, M. Dyeing Properties and Color Fabrics Using Natural Dye and Mordant [Volume 11, Issue 2, 2018, Pages 79-83]
  • Hosseinnezhad, M. The Synthesis of Poly(amidoamine) Dendrimer: Dyeing and Fluorescence Properties [Volume 11, Issue 3, 2018, Pages 173-178]
  • Hosseinnezhad, M. Investigation of Photovoltaic Properties of 1,8-Naphthalimide Dyes in Dye-sensitized Solar Cells [Volume 11, Issue 4, 2018, Pages 253-258]

I

  • Imani, H. Dyeing Properties and Color Fabrics Using Natural Dye and Mordant [Volume 11, Issue 2, 2018, Pages 79-83]

J

  • Jafari, R. The Dependency of Colorimetric Characteristics of Black Fabrics to the Whiteness Attribute of Substrate [Volume 11, Issue 2, 2018, Pages 113-122]
  • Jouyandeh, M. Epoxy Coatings Physically Cured with Hydroxyl-contained Silica Nanospheres and Halloysite nanotubes [Volume 11, Issue 4, 2018, Pages 199-207]

K

  • Karami, H. Dye removal from water by zinc ferrite-graphene oxide nanocomposite [Volume 11, Issue 2, 2018, Pages 85-92]
  • Karami, Z. Effect of Carbon Black Content on Curing Behavior of Polysulfide Coatings [Volume 11, Issue 2, 2018, Pages 103-112]
  • Khajeh Aminian, M. Synthesis of Fe-Doped Titanite and Quasi-Titanite Structures and Studying the Effect of Doping on Physical and Optical Properties [Volume 11, Issue 4, 2018, Pages 221-231]
  • Khajeh Mehrizi, M. Dyeing Properties and Color Fabrics Using Natural Dye and Mordant [Volume 11, Issue 2, 2018, Pages 79-83]
  • Khajenoori, S. Synthesis and Investigation on Viscoelastic Properties of Urethane Acrylate- Polyaniline [Volume 11, Issue 4, 2018, Pages 241-252]
  • Koochakzaei, A. Evaluating the Role of antioxidants in the stabilization of hydroxypropyl cellulose by ATR-FTIR Spectroscopy [Volume 11, Issue 2, 2018, Pages 93-101]

M

  • Madaoui, Z. Scratch Resistance of Paints Degraded by Arid Saharan Environments [Volume 11, Issue 4, 2018, Pages 233-240]
  • Malek, M. Effect of Gas Ratio on Tribological and Corrosion Properties of Ion Beam Sputter Deposited TiN Coatings [Volume 11, Issue 3, 2018, Pages 129-135]
  • Mallakpour, S. Evaluating the Role of antioxidants in the stabilization of hydroxypropyl cellulose by ATR-FTIR Spectroscopy [Volume 11, Issue 2, 2018, Pages 93-101]
  • Mendas, M. Scratch Resistance of Paints Degraded by Arid Saharan Environments [Volume 11, Issue 4, 2018, Pages 233-240]
  • Mirshokraie, A. The Effect of Polyethylene Glycol and Nanoclay on the Rheological Behavior of Dispersing Cationic Polyurethane Nanocomposites [Volume 11, Issue 1, 2018, Pages 33-46]
  • M. larijani, M. Effect of Gas Ratio on Tribological and Corrosion Properties of Ion Beam Sputter Deposited TiN Coatings [Volume 11, Issue 3, 2018, Pages 129-135]
  • Moallem, M. Assessing the Effect of Nylon 66 and Alumina on Mechanical and Thermal Properties of Epoxy-based Adhesives Through Taguchi Experimental Design Analysis [Volume 11, Issue 3, 2018, Pages 149-164]
  • Mohammadi, A. Study of Environment and pH Effects on the Spectral Behavior of Arylazobenzylidene Dyes [Volume 11, Issue 2, 2018, Pages 69-78]
  • Mohammadian, J. Synthesis and Investigation on Viscoelastic Properties of Urethane Acrylate- Polyaniline [Volume 11, Issue 4, 2018, Pages 241-252]
  • Moini Jazani, O. Effect of Carbon Black Content on Curing Behavior of Polysulfide Coatings [Volume 11, Issue 2, 2018, Pages 103-112]
  • Moini Jazani, O. Assessing the Effect of Nylon 66 and Alumina on Mechanical and Thermal Properties of Epoxy-based Adhesives Through Taguchi Experimental Design Analysis [Volume 11, Issue 3, 2018, Pages 149-164]
  • Moini Jazani, O. Epoxy Coatings Physically Cured with Hydroxyl-contained Silica Nanospheres and Halloysite nanotubes [Volume 11, Issue 4, 2018, Pages 199-207]
  • Mokhtari shourijeh, Z. Synthesis, Characterization and Investigation of Photocatalytic Activity of transition metal-doped TiO2 Nanostructures [Volume 11, Issue 4, 2018, Pages 209-220]
  • Moradian, S. Investigation the effect of substrate photo-electrode based on screen method on performance of dye-sensitized solar cells [Volume 11, Issue 1, 2018, Pages 47-54]

N

  • Navarchian, A.H. Effect of Carbon Black Content on Curing Behavior of Polysulfide Coatings [Volume 11, Issue 2, 2018, Pages 103-112]
  • Navarchian, A.H. Epoxy Coatings Physically Cured with Hydroxyl-contained Silica Nanospheres and Halloysite nanotubes [Volume 11, Issue 4, 2018, Pages 199-207]

R

  • Razani, N. Dyeing Properties and Color Fabrics Using Natural Dye and Mordant [Volume 11, Issue 2, 2018, Pages 79-83]
  • Riazi, M. Study of Environment and pH Effects on the Spectral Behavior of Arylazobenzylidene Dyes [Volume 11, Issue 2, 2018, Pages 69-78]
  • Rouhani, Sh. Investigation the effect of substrate photo-electrode based on screen method on performance of dye-sensitized solar cells [Volume 11, Issue 1, 2018, Pages 47-54]

S

  • Sadeghi-Kiakhani, M. Salt-free dyeing of cotton fabric modified with prepared chitosan-poly propylene imine dendrimer using direct dyes [Volume 11, Issue 1, 2018, Pages 21-32]
  • Sadighian, S. Dye removal from water by zinc ferrite-graphene oxide nanocomposite [Volume 11, Issue 2, 2018, Pages 85-92]
  • Saeb, M.R. High-performance starch-modified graphene oxide/epoxy nanocomposite coatings: A glimpse at cure kinetics and fracture behavior [Volume 11, Issue 1, 2018, Pages 55-62]
  • Saeb, M.R. Effect of Carbon Black Content on Curing Behavior of Polysulfide Coatings [Volume 11, Issue 2, 2018, Pages 103-112]
  • Saeb, M.R. Epoxy Coatings Physically Cured with Hydroxyl-contained Silica Nanospheres and Halloysite nanotubes [Volume 11, Issue 4, 2018, Pages 199-207]
  • Safapour, S. Salt-free dyeing of cotton fabric modified with prepared chitosan-poly propylene imine dendrimer using direct dyes [Volume 11, Issue 1, 2018, Pages 21-32]
  • Salehi, R. Acid Dyes Removal from textile wastewater using waste cotton activated carbon: Kinetic, isotherm, and thermodynamic studies [Volume 11, Issue 1, 2018, Pages 9-20]
  • Sen, A. Comparison of dyeing of polyester fibers with natural dye and bio-mordant [Volume 11, Issue 3, 2018, Pages 165-172]
  • Shabanian, M. High-performance starch-modified graphene oxide/epoxy nanocomposite coatings: A glimpse at cure kinetics and fracture behavior [Volume 11, Issue 1, 2018, Pages 55-62]
  • Shahidi, M. A New Polymeric Nanocomposite Coating for Corrosion Protection of Carbon Steel in HCl Solution [Volume 11, Issue 1, 2018, Pages 1-8]
  • Shahidi, M. Investigating the Effect of Penicillin G as Environment-friendly Corrosion Inhibitor for Mild Steel in H3PO4 Solution [Volume 11, Issue 3, 2018, Pages 137-147]
  • Shaki, H. Investigation of Photovoltaic Properties of 1,8-Naphthalimide Dyes in Dye-sensitized Solar Cells [Volume 11, Issue 4, 2018, Pages 253-258]
  • Shirkavand Hadavand, B. The Effect of Polyethylene Glycol and Nanoclay on the Rheological Behavior of Dispersing Cationic Polyurethane Nanocomposites [Volume 11, Issue 1, 2018, Pages 33-46]
  • Shirkavand Hadavand, B. Synthesis and Investigation on Viscoelastic Properties of Urethane Acrylate- Polyaniline [Volume 11, Issue 4, 2018, Pages 241-252]
  • Sohrabian, M. Assessing the Effect of Nylon 66 and Alumina on Mechanical and Thermal Properties of Epoxy-based Adhesives Through Taguchi Experimental Design Analysis [Volume 11, Issue 3, 2018, Pages 149-164]
  • Soltaninejad, F. Investigating the Effect of Penicillin G as Environment-friendly Corrosion Inhibitor for Mild Steel in H3PO4 Solution [Volume 11, Issue 3, 2018, Pages 137-147]

V

  • Vaselnia, S.Y. Synthesis of Fe-Doped Titanite and Quasi-Titanite Structures and Studying the Effect of Doping on Physical and Optical Properties [Volume 11, Issue 4, 2018, Pages 221-231]

Y

  • Yarahmadi, E. High-performance starch-modified graphene oxide/epoxy nanocomposite coatings: A glimpse at cure kinetics and fracture behavior [Volume 11, Issue 1, 2018, Pages 55-62]

Z

  • Zahloul, H. Scratch Resistance of Paints Degraded by Arid Saharan Environments [Volume 11, Issue 4, 2018, Pages 233-240]